Shell Turbo S4 X 32

• Based on gas-to-liquids (GTL) technology
• Approved by GE as a Low Varnishing (LV) fluid
• Outstanding long-term performance under the most severe operating conditions and will help to minimize deposit and sludge formation, even under cyclic peak-loading conditions
• Meets and exceeds the specifications and requirements of the major turbine manufacturers, including MAN D&T, Siemens, GE, MHPS, and Alstom
• 10,000+ Hours, Turbine Oil Stability Test (TOST LIFE)
• 1 Minute Air Release
• Designed to protect 20 MG, Sludge (TOST 1,000 Hours)

Turbo S4 GX

• Based on gas-to-liquids (GTL) technology
• Approved by GE as a Low Varnishing (LV) fluid
• Developed to meet the demands of the latest high-efficiency turbine systems with gearboxes
• Outstanding long-term performance under the most severe operating conditions and will help to minimize deposit and sludge formation, even under cyclic peak-loading conditions
• Meets and exceeds the specifications and requirements of the major turbine manufacturers, including MAN D&T, Siemens, GE, MHPS, and Alstom
• 10,000+ Hours, Turbine Oil Stability Test (TOST LIFE)
• 1 Minute Air Release
• Designed to protect 20 MG, Sludge (TOST 1,000 Hours)

Shell EcoSafe Turbine Fluid S5 X 25/32

• Top-tier gas and combined-cycle turbine fluid
• Delivers strong protection against fluid breakdown, even under conditions of high oxidation and thermal stress
• Can help extend service life and reduces maintenance costs compared to mineral-based turbine products
• Uses inherently oxidatively-stable base fluids that are formulated with a balance additive package, which provides high-resistance to oxidative degradation and the formation of corrosive species, deposits, and sludge
• The fluid enables rapid air-release and is formulated with an anti-foam additive to help prevent pump cavitation, excessive wear, and premature fluid oxidation
• Compatible with commonly used seals, hoses, and metals
• Meets General Electric’s PAG Non-Varnishing specifications for GEK 32568K

Shell EcoSafe Turbine Fluid S5 GX 25

• Top-tier gas and combined-cycle turbine fluid for geared turbines
• Provides exceptional protection against fluid breakdown, even under conditions of high oxidation and thermal stress
• The fluid’s excellent resistance to varnish and sludge formation helps to reduce the wear of critical system components and prevent unplanned turbine outages due to valve sticking
• Offers enhanced anti-wear protection for heavily loaded gearboxes
• Meets General Electric’s PAG Non-Varnishing specifications for GEK 32568K

Shell Turbo T 32, 46, or 68

• Developed to offer improved performance. Capable of meeting the demands of the most modern steam turbine systems and light-duty gas turbines, which require no enhanced anti-wear performance for the gearbox. Can also be used for oil-lubricated electric motors
• Strong Control of Oxidation
• High Resistance to Foaming and Rapid Air Release
• Positive Water-Shedding Properties
• Excellent Rust & Corrosion Protection
• See technical data sheet for the full list of specifications, approvals & recommendations

Shell Corena S4 R 46 or 68

• An advanced synthetic air compressor oil designed to deliver the highest performance lubrication of rotary sliding vane and screw air compressors
• Advanced additives provide excellent protection and performance for compressors running with oil maintenance intervals of 10,000 hours and up to 12,000 hours
• Suitable to cover applications where a synthetic bearing & circulating oil or R&O (ISO VG 32-68) is required

Shell Turbo T 68

• Developed to offer improved performance. Capable of meeting the demands of the most modern steam turbine systems and light-duty gas turbines, which require no enhanced anti-wear performance for the gearbox. Can also be used for oil-lubricated pumps
• Strong Control of Oxidation
• High Resistance to Foaming and Rapid Air Release
• Positive Water-Shedding Properties
• Excellent Rust & Corrosion Protection
• See technical data sheet for the full list of specifications, approvals & recommendations

Shell Tellus S2 MX 68

• High-performance hydraulic fluid based on Group II base oils
• Long Oil Life
• Extra Protection
• Maintain System Efficiency
• Industrial Applications
• Designed to meet Bosch Rexroth Fluid Rating RDE 90245, Parker Denison (HF-0, HF-1, HF-2), Eaton E-FDGN-TB002-E, Fives (Cincinnati Machine) P-68

Shell Omala S2 GX 150, 220, 320

• High-Quality extreme pressure (EP) oils designed primarily for the lubrication of heavy-duty industrial gearboxes
• Extra Protection against oxidation, wear & micro-pitting, corrosion & foaming
• Approved by Siemens AG

Shell Omala S4 GXV 150, 220, or 320

• Advanced synthetic heavy-duty industrial gear oil
• Outstanding lubrication performance under severe operating conditions, including reduced friction, long service life, high resistance to micro-pitting for optimal gear protection and superb compatibility with seals
• Approved by Siemens AG, see full list of approvals on the technical data sheet

Shell Morlina S3 BA 220

• Premium quality rust & oxidation inhibited lubricating oils providing excellent lubrication in MORGOIL^® bearing & steel mill circulating systems
• Low foaming tendencies and excellent water separation properties
• Meets the requirements of Morgan and Danieli for super demulsibility applications

Shell Morlina S4 B 220

• High-performance synthetic bearing and circulation lubricants
• Outstanding lubrication performance, including improved energy efficiency, filterability, and long service life even under challenging operating conditions
• Intended for multi-purpose applications

Shell Morlina S4 B 220

• High-performance synthetic bearing and circulation lubricants
• Outstanding lubrication performance, including improved energy efficiency, filterability, and long service life even under challenging operating conditions
• Intended for multi-purpose applications

Shell Corena S4 P 100

• Advanced synthetic air compressor oil incorporating synthetic ester base fluids and a unique high-performance additive system
• Delivers high-performance lubrication for high-pressure reciprocating compressors running in excess of 220°C discharge temperatures at elevated pressures

Shell Corena S4 R 46 or 68

• An advanced synthetic air compressor oil designed to deliver the highest performance lubrication of rotary sliding vane and screw air compressors
• Advanced additives provide excellent protection and performance for compressors running with oil maintenance intervals of 10,000 hours and up to 12,000 hours
• Suitable to cover applications where a synthetic bearing & circulating oil or R&O (ISO VG 32-68) is required

Shell Corena S5 R 46

• Top-tier synthetic lubricant based on polyalkylene glycol (PAG) and ester technology designed for use in rotary screw air compressors
• Enables long oil drain intervals with varnish-free operation
• Excellent choice for service fill in situations where polyglycol-ester type lubricants are already in use
• Demonstrated strong performance in machines of market-leading OEMs such as Ingersoll-Rand^®

Shell Corena PCF

• Portable air compressor lubricant designed for operation in variable temperatures, including extreme heat to extreme cold
• Excellent low-temperature fluidity for cold crank start-ups with versatility to adequate lubrication in high-temperatures without losing viscosity and maintaining the ability to separate from water

Shell Corena S5 A 32

• A long-life, top-tier synthetic lubricant based on polyalkylene glycol (PAG) technology designed for rotary screw air compressors
• Allows for extended drain intervals
• Operates cleaner and more efficiently in high-temperature and pressure applications

Shell Corena S6 A 46

• An extended oil life, top-tier synthetic lubricant based on polyalkylene glycol (PAG) and pentaerythritol ester technology with next-generation additives for rotary screw air compressors
• Varnish formation protection benefits in higher temperature and pressure applications

Shell EcoSafe EHC S3 DU 46 or 68

• Synthetic fluid formulated with high viscosity index, polyalkylene glycol (PAG) base stocks for electro-hydraulic control (EHC) valve service in steam and gas turbines, and other fossil-fuel power station applications, including high-pressure systems and systems with servo valves
• Stable, non-corrosive, high-flash-point materials that are compatible with nearly all the commonly used materials in standard hydraulic systems
• Biodegradable by greater than 60% after 28 days in the OECD 301B Carbon dioxide evolution test
• Classified as an HFDU type fire-resistant hydraulic fluid
• With proper flushing and condition monitoring, systems can be converted to Shell EcoSafe EHC S3 DU from phosphate-ester and polyol-ester-based fluids

Shell Turbo S5 DR 46

• A fire-resistant hydraulic and lubricating fluid made using Tri-Aryl Phosphates based on butylated phenol
• Can be used as the hydraulic fluid in electrohydraulic governor control (EHC) systems in steam and gas turbines
• Approved and or exceeds the requirements of the major original equipment manufacturers such as General Electric (GE), Mitsubishi Hitachi Power Systems, and Siemens
• Approved by FM (Factory Mutual) Global against Standard 6930 for ‘Less flammable hydraulic fluids’

Shell Turbo T 32

• Developed to offer improved performance. Capable of meeting the demands of the most modern steam turbine systems and light-duty gas turbines, which require no enhanced anti-wear performance for the gearbox. Can also be used for fluid couplings
• Strong Control of Oxidation
• High Resistance to Foaming and Rapid Air Release
• Positive Water-Shedding Properties
• Excellent Rust & Corrosion Protection
• See technical data sheet for the full list of specifications, approvals & recommendations

Shell Tellus S2 MX 32

• High-performance hydraulic fluid based on Group II base oils
• Long Oil Life
• Extra Protection
• Maintain System Efficiency
• Industrial Applications
• Designed to meet Bosch Rexroth Fluid Rating RDE 90245, Parker Denison (HF-0, HF-1, HF-2), Eaton E-FDGN-TB002-E, Fives (Cincinnati Machine) P-68

Shell Turbo S4 X 32

• Based on gas-to-liquids (GTL) technology
• Outstanding long-term performance under the most severe operating conditions and will help to minimize deposit and sludge formation, even under cyclic peak-loading conditions
• Meets and exceeds the specifications and requirements of the major turbine manufacturers, including MAN D&T, Siemens, GE, MHPS, and Alstom
• 10,000+ Hours, Turbine Oil Stability Test (TOST LIFE)
• 1 Minute Air Release
• Designed to protect 20 MG, Sludge (TOST 1,000 Hours)
• Can be used for fluid couplings

Shell EcoSafe Revive

• Synthetic-based solvency enhancer for cleaning varnish from rotating equipment
• Improve the solubility of existing hydrocarbon-based turbine fluids and repair fluids with elevated and high varnish potential ratings
• Miscible and compatible with all major commercial hydrocarbon-based turbine fluids, filter media and elastomers

Shell Turbo T 32

• Developed to offer improved performance capable of meeting the demands of the most modern steam turbine systems and light duty gas turbines, which require no enhanced ant-wear performance for the gearbox. Can also be used for fluid couplings
• Strong Control of Oxidation
• High Resistance to Foaming and Rapid Air Release
• Positive Water-Shedding Properties
• Excellent Rust & Corrosion Protection
• See technical data sheet for the full list of specifications, approvals & recommendations

Shell Turbo S4 X 32

• Based on gas-to-liquids (GTL) technology
• Approved by GE as a Low Varnishing (LV) fluid
• Outstanding long-term performance under the most severe operating conditions and will help to minimize deposit and sludge formation, even under cyclic peak-loading conditions
• Meets and exceeds the specifications and requirements of the major turbine manufacturers, including MAN D&T, Siemens, GE, MHPS, and Alstom
• 10,000+ Hours, Turbine Oil Stability Test (TOST LIFE)
• 1 Minute Air Release
• Designed to protect 20 MG, Sludge (TOST 1,000 Hours)

Shell Turbo S4 GX 32

• Based on gas-to-liquids (GTL) technology
• Approved by GE as a Low Varnishing (LV) fluid
• Developed to meet the demands of the latest high-efficiency turbine systems with gearboxes
• Outstanding long-term performance under the most severe operating conditions and will help to minimize deposit and sludge formation, even under cyclic peak-loading conditions
• Meets and exceeds the specifications and requirements of the major turbine manufacturers, including MAN D&T, Siemens, GE, MHPS, and Alstom
• 10,000+ Hours, Turbine Oil Stability Test (TOST LIFE)
• 1 Minute Air Release
• Designed to protect 20 MG, Sludge (TOST 1,000 Hours)

Shell EcoSafe Turbine Fluid S5 GX 25

• Top-tier gas and combined-cycle turbine fluid for geared turbines
• Provides exceptional protection against fluid breakdown, even under conditions of high oxidation and thermal stress
• The fluid’s excellent resistance to varnish and sludge formation helps to reduce the wear of critical system components and prevent unplanned turbine outages due to valve sticking
• Offers enhanced anti-wear protection for heavily loaded gearboxes
• Meets General Electric’s PAG Non-Varnishing specifications for GEK 32568K

Shell Turbo T 32, 46, or 68

• Developed to offer improved performance. Capable of meeting the demands of the most modern steam turbine systems and light-duty gas turbines, which require no enhanced anti-wear performance for the gearbox. Can also be used for oil-lubricated electric motors
• Strong Control of Oxidation
• High Resistance to Foaming and Rapid Air Release
• Positive Water-Shedding Properties
• Excellent Rust & Corrosion Protection
• See technical data sheet for the full list of specifications, approvals & recommendations

Shell Corena S4 R 46, or 68

• An advanced synthetic air compressor oil designed to deliver the highest performance lubrication of rotary sliding vane and screw air compressors
• Advanced additives provide excellent protection and performance for compressors running with oil maintenance intervals of 10,000 hours and up to 12,000 hours
• Suitable to cover applications where a synthetic bearing & circulating oil or R&O (ISO VG 32-68) is required

Shell Turbo T 68

• Developed to offer improved performance. Capable of meeting the demands of the most modern steam turbine systems and light-duty gas turbines, which require no enhanced anti-wear performance for the gearbox. Can also be used for oil-lubricated pumps
• Strong Control of Oxidation
• High Resistance to Foaming and Rapid Air Release
• Positive Water-Shedding Properties
• Excellent Rust & Corrosion Protection
• See technical data sheet for the full list of specifications, approvals & recommendations

Shell Tellus S2 MX 68

• High-performance hydraulic fluid based on Group II base oils
• Long Oil Life
• Extra Protection
• Maintain System Efficiency
• Industrial Applications
• Designed to meet Bosch Rexroth Fluid Rating RDE 90245, Parker Denison (HF-0, HF-1, HF-2), Eaton E-FDGN-TB002-E, Fives (Cincinnati Machine) P-68

Shell Omala S2 GX 150, 220, or 320

• High-Quality extreme pressure (EP) oils designed primarily for the lubrication of heavy-duty industrial gearboxes
• Extra Protection against oxidation, wear & micro-pitting, corrosion & foaming
• Approved by Siemens AG

Shell Omala S4 GXV 150, 220, or 320

• Advanced synthetic heavy-duty industrial gear oil
• Outstanding lubrication performance under severe operating conditions, including reduced friction, long service life, high resistance to micro-pitting for optimal gear protection and superb compatibility with seals
• Approved by Siemens AG, see full list of approvals on the technical data sheet

Shell Morlina S3 BA 220

• Premium quality rust & oxidation inhibited lubricating oils providing excellent lubrication in MORGOIL^® bearing & steel mill circulating systems
• Low foaming tendencies and excellent water separation properties
• Meets the requirements of Morgan and Danieli for super demulsibility applications

Shell Morlina S4 B 220

• High-performance synthetic bearing and circulation lubricants
• Outstanding lubrication performance, including improved energy efficiency, filterability, and long service life even under challenging operating conditions
• Intended for multi-purpose applications

Shell Morlina S4 B 220

• High-performance synthetic bearing and circulation lubricants
• Outstanding lubrication performance, including improved energy efficiency, filterability, and long service life even under challenging operating conditions
• Intended for multi-purpose applications

Shell Corena S4 P 100

• Advanced synthetic air compressor oil incorporating synthetic ester base fluids and a unique high-performance additive system
• Delivers high-performance lubrication for high-pressure reciprocating compressors running in excess of 220°C discharge temperatures at elevated pressures

Shell Corena S4 R 46 or 68

• An advanced synthetic air compressor oil designed to deliver the highest performance lubrication of rotary sliding vane and screw air compressors
• Advanced additives provide excellent protection and performance for compressors running with oil maintenance intervals of 10,000 hours and up to 12,000 hours
• Suitable to cover applications where a synthetic bearing & circulating oil or R&O (ISO VG 32-68) is required

Shell Corena S5 R 46

• Top-tier synthetic lubricant based on polyalkylene glycol (PAG) and ester technology designed for use in rotary screw air compressors
• Enables long oil drain intervals with varnish-free operation
• Excellent choice for service fill in situations where polyglycol-ester type lubricants are already in use
• Demonstrated strong performance in machines of market-leading OEMs such as Ingersoll-Rand^®

Shell Corena PCF

• Portable air compressor lubricant designed for operation in variable temperatures, including extreme heat to extreme cold
• Excellent low-temperature fluidity for cold crank start-ups with versatility to adequate lubrication in high-temperatures without losing viscosity and maintaining the ability to separate from water

Shell Corena S5 A 32

• A long-life, top-tier synthetic lubricant based on polyalkylene glycol (PAG) technology designed for rotary screw air compressors
• Allows for extended drain intervals
• Operates cleaner and more efficiently in high-temperature and pressure applications

Shell Corena S6 A 46

• An extended oil life, top-tier synthetic lubricant based on polyalkylene glycol (PAG) and pentaerythritol ester technology with next-generation additives for rotary screw air compressors
• Varnish formation protection benefits in higher temperature and pressure applications

Shell EcoSafe EHC S3 DU 46 or 68

• Synthetic fluid formulated with high viscosity index, polyalkylene glycol (PAG) base stocks for electro-hydraulic control (EHC) valve service in steam and gas turbines, and other fossil-fuel power station applications, including high-pressure systems and systems with servo valves
• Stable, non-corrosive, high-flash-point materials that are compatible with nearly all the commonly used materials in standard hydraulic systems
• Biodegradable by greater than 60% after 28 days in the OECD 301B Carbon dioxide evolution test
• Classified as an HFDU type fire-resistant hydraulic fluid
• With proper flushing and condition monitoring, systems can be converted to Shell EcoSafe EHC S3 DU from phosphate-ester and polyol-ester-based fluids

Shell Turbo DR 46

• A fire-resistant hydraulic and lubricating fluid made using Tri-Aryl Phosphates based on butylated phenol
• Can be used as the hydraulic fluid in electrohydraulic governor control (EHC) systems in steam and gas turbines
• Approved and or exceeds the requirements of the major original equipment manufactuers such as General Electric (GE), Mitsubishi Hitachi Power Systems, and Siemens
• Approved by FM (Factory Mutual) Global against Standard 6930 for ‘Less flammable hydraulic fluids’

Shell Turbo T 32

• Developed to offer improved performance. Capable of meeting the demands of the most modern steam turbine systems and light-duty gas turbines, which require no enhanced anti-wear performance for the gearbox. Can also be used for fluid couplings
• Strong Control of Oxidation
• High Resistance to Foaming and Rapid Air Release
• Positive Water-Shedding Properties
• Excellent Rust & Corrosion Protection
• See technical data sheet for the full list of specifications, approvals & recommendations

Shell Tellus S2 MX 32

• High-performance hydraulic fluid based on Group II base oils
• Long Oil Life
• Extra Protection
• Maintain System Efficiency
• Industrial Applications
• Designed to meet Bosch Rexroth Fluid Rating RDE 90245, Parker Denison (HF-0, HF-1, HF-2), Eaton E-FDGN-TB002-E, Fives (Cincinnati Machine) P-68

Shell Turbo S4 X 32

• Based on gas-to-liquids (GTL) technology
• Outstanding long-term performance under the most severe operating conditions and will help to minimize deposit and sludge formation, even under cyclic peak-loading conditions
• Meets and exceeds the specifications and requirements of the major turbine manufacturers, including MAN D&T, Siemens, GE, MHPS, and Alstom
• 10,000+ Hours, Turbine Oil Stability Test (TOST LIFE)
• 1 Minute Air Release
• Designed to protect 20 MG, Sludge (TOST 1,000 Hours)

Shell EcoSafe Revive

• Synthetic-based solvency enhancer for cleaning varnish from rotating equipment
• Improve the solubility of existing hydrocarbon-based turbine fluids and repair fluids with elevated and high varnish potential ratings
• Miscible and compatible with all major commercial hydrocarbon-based turbine fluids, filter media and elastomers